CERAMICSPEED - UFO DRIP CHAIN COATING - 100ml

PRODUCT DESCRIPTION

CERAMICSPEED - UFO DRIP ALL CONDITIONS CHAIN COATING

Our acclaimed UFO Drip Chain Coating has been updated to be known as UFO Drip All Conditions. Now, in a new, smaller bottle size and an optimized formula that has a crisp white appearance while applying, that virtually disappears once fully dry.

The chain coating is developed to support all disciplines and is based on a non-toxic, non-flammable and bio-degradable formula. For wet conditions, the chain must be dried following the ride and a fresh coating of UFO Drip applied to ensure the best protection and continuing optimization.

The new UFO Drip blend is designed not only to optimise drivetrain efficiency. The non-toxic, non-flammable, bio-degradable formula is both safe and environmentally friendly.

HOW TO APPLY UFO DRIP

Our UFO Drip Chain Coating is designed for easy and effortless application. We've included an agitator in each bottle to ensure that the wax remains evenly blended even at the temperature extremes. Just remember to shake the bottle well before each application.

For new chains and first application: Fully clean and dry the chain, ensuring to rinse all cleaner off before drying. We recommend CeramicSpeed Clean Drivetrain for this purpose. Always shake your UFO Drip bottle well before each use to ensure an even application of waxes.

Apply UFO Drip directly to the chain rollers over the cassette, rotating the chain slowly backwards to coat the entire length of the chain twice. Next, apply UFO Drip to the inside of the chain, along the rollers on the bottom span over the chain and coat the entire length of the chain twice. Allow UFO Drip to dry a minimum of 8 hours for best results and clean performance.

For follow up applications with an overall clean drive train: Wipe the chain surface with a dry and clean cloth. Shake the UFO Drip bottle well. Apply UFO Drip directly to the chain rollers over the cassette, rotating the chain slowly backwards. Coat the entire length of the chain twice. Let dry for 8 hours. If your drive train has become thoroughly dirty and contaminated, begin with a full cleaning and coating as you would for a first application.

• 100ml Bottle
• Up to 300 km. per coating
• Up to 35 coatings per bottle
• Over 15% faster than previous formula
• Increased temperature stability - apply between 5-35°C / 41-95°F.